Showing posts with label sekine. Show all posts
Showing posts with label sekine. Show all posts

Monday, November 10, 2008

Fort Langley CX

I've put up a 19 photo flickr set of my story from today's Fort Langley CX race. East Van repped hard in the mud-filled forests and fields of Aldor Acres Farm.  I kept the 60" gear which was successful at Vanier and only wished I had a longer option when I was chasing down the race leader on the final straight. Elaine's also got a ton of photos, including quite a few hilarious ones of myself and Matt rinsing off in the creek.




Sunday, October 12, 2008

Kootenays ride report

In my last post the Sekine looked like this: fresh profile bar tape on 42cm ergo drops and a 90mm stem, with Tektro levers and "euro" brake setup. Cockpit adjustments are underway, after some riding on varied terrain.


The first test was one beyond the limits of most cyclocross wheels. Scaling the edges of the rocky east shore of Slocan lake, the main objective is to avoid pinch flats. I see this as punishment for my having dropped out of New Brighton on much less treacherous ground. "Diligent" is the necessary riding style, tire pressure somewhere less than the 65psi that comfortably took me to work and back two days prior. The sentinel, Beckham, adds another degree of unpredictability to the equation; he's fast, but likely to bolt into the woods at any point.


It's difficult to determine how a bike fits on jagged rocks. All I can say is that riding along the narrow trail, the vertigo-inducing rock bed on your side is not confidence inspiring.  With your brakes switched left-right, even less. I'm not exaggerating the intensity of this trail, which makes it all that much more amazing that my mom rode it on my aunt's Brodie in May. Getting back to the current ride, though, we made it into New Denver with only one poop-on-the-tire incident.

The purpose of this trip was to see Peter Roulston, who runs the Bicycle Hospital in town. During the summer, Peter opens for business two days a week, while taking appointments beyond that. He has a basic stock of Norco catalogue bits, bins full of odds and ends collected over the years, and a couple of used bikes ready for sale. 


Talking bikes with Peter is enjoyable, and he was intrigued by my franken-conversion. The unusual part I requested was a bottom bracket (or freewheel) spacer, but it turned out that a threaded equivalent was all he could provide. While probably a couple mm wider than I needed, the freewheel side of the spare KHS wheel had a ton of thread to spare.

After buying a tube and two bottom bracket lockrings from Peter, I headed back along the lake trail with spirits high. He had also told me about a route to seek out, up the next glacial valley to the south. I wonder if I'll find anything like this steep mining cart track, which I stopped to have a look at along the way home - in the past two decades, these tracks have gone from recognizable to almost-ruined. And on the devastation track, I lowered the tire pressure a few blasts and slammed a rock shortly after this photo was taken. While somehow avoiding the New Brighton pinch flat fate, a new gouge was added to the front rim.


Back at the house, I fired up a Bialetti and got to thinking about fitment again. The hoods do feel pretty far away. The answer to this question might end up being interrupter levers, as Lyle so aptly mentioned in his comment to the last post. The reason for this inclination is how much larger this bar setup is than my last comfortable setup on the same bike - 80mm stem and 39cm bars. That's 10mm of reach and 1.5cm of width on each side, plus the extended hoods of the wannabe-brifters. (This begs a measurement of the still-assembled Marinoni.) I haven't fitted a flat bar mountain bike in a while, but this is effectively simulated with interrupters and wide drops.


I bored my family with longwinded explanations about gear ratios while switching the rear tire to the second wheel and installing the 18 tooth freewheel. The bottom bracket lockring leaves lots of threads, and alleviates the spoke head interference which had prevented the freewheel's pre-trip installation. The bearings in this hub - quite possibly an original from Camilo's stolen-in-SF Flite 100 - are reassuringly better set than my other "race loose" wheel.


With 55psi in the tires, I headed north on the rail grade down to lake level, and had a Pilsner on the beach in Rosebery. Beckham's unpredictable gallop is bigger challenge when he's got gravity on his side; I was topping out the new 60" gear trying to stay ahead of him. There are a couple fun singletrack sections at lake level, where the trail diverts from the rail line temporarily. On the way back, I took the dog to school. I actually lost him. Apparently 40/18 is a good gear for climbing rail grade.


Changes are afoot. I took today off riding to do some work around the house, but also did some as-yet-undeclared adjustments on the bike. Tomorrow I plan to ascend a new valley, from the other town on the lake, Silverton.

Wednesday, October 08, 2008

Overkill and Adequate

There are certain aspects of Lyle's mechanical tendencies that I have trouble avoiding; one of these is in a job done properly. I've just committed to cleaning and regreasing the chainring bolts on this bike. Why? Because they won't be tight enough if everything isn't put together fresh and clean; and, the setup will be that much easier to take apart next time.


Relating to Lyle's last post, bike fitment is another area that we at Project B are highly aware (and critical) of. I've just set up the Sekine in its second cyclocross iteration. After taking the bike to the New Brighton Cyclocross - fixed, 42/16, 40cm bullhorns, front brake only, rack and fender (see this is where we talk about the right tool for the job) - and not doing too badly until a pinch flat, I decided cross was worth pursuing. Thanks to Elaine and James for rad photos:



Here we are lined up at the start, Thunder in Your Heart still blasting through our heads I can guarantee you. I have the man Matt Barber and Team Mighty to thank for a loaner set of tires for the race.


...and after we were both taken out by mechanicals. Not Cru, but Luke, just missing the taco'd wheel. Send me an angel.


Back to the bike, though. Slightly slacker-than-road angles, tons of clearance, and a good quality frameset that fits; cue up the viable possibility of Sekineclocross, and my first crack at ergo bars. With a pair of Tektro aero levers won the night previous at the Eff Off Nikcee alleycat and the prospect of a parts bin build, a good day was spent with Projekt-Breakfast followed by bar scavenging, cabling, and taping.

Then a bunch of rowdy fools showed up at Wendell's weekly cyclocross clinic to tear ass around Jericho Park.


A 90mm Cinelli Frog and 42cm ergo drops are completely appropriate with the style of the build. While the hoods seem a bit far away at the moment, they're amazing for climbing. Oh, and the brakes are set up "euro" - for now, at least. I've always been fine with right-hand front brakes, but when there's a left lever, I generally default to left-front. Of course, this is an easy switch if I choose to do so, as the Profile splash tape has no adhesive.

Let's get back to why I'm changing the chainring on this bike. At the race, fixed 42/16 wasn't ideal - uphill switchbacks especially. Swapping to the 16 tooth freewheel also wasn't perfect. Off-road riding demands a shorter gear. I talked about getting a 17, until Mike hooked me up with a loud brassy 18 tooth freewheel (o hai, Mike at New Brighton). Next problem: the chain is going to be too short. Hence, the switch to 40 up front. Same number of teeth, 60 inch gear instead of 71. And the dropouts will happily allow a 17 and possibly the 16 as well. 

Thanksgiving 2006, I rode it from New Denver to Three Forks and back, getting my pants caught in the drivetrain in MKS Sylvans and tied down wine-red toe clip straps (what ever happened to those pedals, Dennis?). This year, I take the Sekine in another phase intending on the same destination, with a different route: The Galena Trail. The new gear should be great for the rail grade, but I'm bringing the spare with the 16 anyway.

Is there anyone who wouldn't be stoked on the trail after seeing this graphic?



This bike has seen many phases, possibly more than even the KHS did. Let's have a look back in the archives for some 2006 action. I remember Tim Wyatt busting my balls over the authenticity of the paint the first night I brought it out. Yes, it's still the original paint on Tange Champion 2, though I bent the original fork learning how to bunnyhop it. 


The Sekine is again hooked up. Matching wheelset, two rears with, eventually, four gearing options. Ergo bars and loud tape. Cleaned and greased chainring bolts. This weekend should provide plenty of uphill switchbacks to dial in the fit. The Sunday after that, October 19, is the Vanier Park Cyclocross. See you there.

Thursday, January 10, 2008

Bike Swappin'

Since Lyle broke the Bianchi, he has been riding my Sekine. As he was looking for a new frameset and wanted to ride track geometry on the street, it was a no-brainer that he try out my KHS as well. Here are some photos from Wednesday's bike swap breakfast. It's interesting to see how much longer Lyle's legs are: 7cm to be exact.

2005 KHS Flite 100, 57cm square, Reynolds 520. This was the "Ugly-look Winter KHS" that I took to the 2008 6 Days of Burnaby. Race winner; clavicle breaker.


Lyle needed only put 30km on this setup before ordering the identical frameset from Spicer. Fortunately, the SLUT seat post is long enough for him. I'm looking forward to dropping the post and trying out the bullhorns and Sora-Ace caliper.


1981 Sekine, 56cm square, Tange #2. 1cm shorter in the seat tube than Lyle's broken Bianchi. This is what Nick T. would call a "proper gentleman's bike," as it exudes class.


I wanted to try this look on the Sekine ever since I stole its original bar/stem/saddle on the Marinoni. I apologize about the blue tires; they look horrible, but are the best tires I currently own in terms of traction. In fact, I think Lyle's cockpit just doesn't look as good with 7cm less post. After 30km on this setup, I think I'll keep it this way for a bit. Very upright and gentlemanly.

Tuesday, November 06, 2007

A header quote worth eternalizing.

To start, a couple for the B-tionary.

monstrumental: a combination of monster and instrumental; an instrumental monster.

ratchet: a modern four pawl BMX freewheel, which sounds like a ratchet strapped to your hub.

Herbert Werthers and his older bro the Megatron were monstrumental in the Proj-B summer manual sessions. Lyle and I are both manualing through two lane intersections. Next up, hop to manual - I'm eyeing the north downhill grind box at Confederation Park. Anybody up for a Confederation adventure that doesn't involve John A. MacDonald, contact Project B. The fall air is great while one-wheeling a ratchet through First and Commercial.

What a great time to get your first real BMX; it looks like n1ck is going to be rounding out P-B's fleet of twenties, after respectfually passing up the '98 S&M Next Gen Dirt Bike. That guy deserves a BMX by now, even if he's only most likely to find another nerve ending that doesn't comply with what Cru Jones would have called freestyle riding. Duncan, Mr. 700cmx, has a Fit that n1ck's soon enough acquiring. Too bad it doesn't fit Duncan; I wonder if he'd be better on a bigger frame.

Though I haven't been riding 700cmx lately, I have been geared hooning on the Marinoni, and have decided that I don't want to think about 7 speeds; I want 6: 3 low and 3 high. And, if the deal for the 600 shifters goes through, I'd not have a choice whether I ran friction with a 6-speed freewheel. The seven speed freewheel does dangle in front of me, though I so dislike the still-large range and contrasting black colour (paintable, maybe?) of the 28 tooth big ring. Sometimes makes you want to ride a single speed freewheel, which happens to look like the Sekine's next incarnation - which would be great as a guest bike.

We'll finish up with a quote from Trent, currently seen in the header quote: "in hindsight, hot-knifing shitty allan keys on my stove to burn a hole in my rim tape for the valve stem might not have been the most straightforward solution." Classic, Trent. You're right, the drill probably wouldn't have worked very well either. Nice score on the Drago.

Thursday, August 23, 2007

show-usyr-bobs

show-usyr-bobs fliers


or colour if you prefer...